Peugeot 308 Key Fob Replacement
Peugeot's 308 may be catching on a little however, it's still attractive. It's not the most luxurious car in its class, but it's a relaxing and civilised drive.
We are often asked at Coded Car Keys to replace peugeot key fobs. Whether the problem is ongoing or continuous the following tips will help.
Water Damage
If you accidentally drop your fob in a puddle or splash it with water while kayaking, swimming canoeing, rafting or canyoning, it's likely to be damaged by water. The best way to avoid this from happening is to keep it in a dry bag when you're going outdoors or doing activities where the fob could be exposed to large amounts of water.
It's also crucial to ensure sure that the fob has dried out before you open it up and then use it again. If you detect any smells emanating from the fob like an industrial liquid smell or the scent of windshield washer fluid, it's another indication that it's been submerged in water.
A wet circuit could cause the battery's charge to be drained or even explode. If you're able, if you can, pull the 308 key fob of the water in which it got stuck in it, flip the button side down and shake it out as much water as possible before opening the case. Take the battery out, and then wipe the circuit board down with a cotton swab that has been submerged in 90 percent alcohol.
Other reasons that your Peugeot 308 remote entry keyless system may not work include a dead coin-cell battery, receiver module problems, signal interference or a damaged chip. If none of the above is the problem you can reset the system by disconnecting a 12 volt battery from the car for 15 minutes.
Dead Coin Battery
Peugeot cars come with remote start systems which allows drivers to start their vehicle from a distance, allowing them to warm up or cool down the car before entering. This feature is extremely helpful, especially during winter's cold and chilly months. The remote start system can not function due to a variety of reasons, including the battery being dead.
A coin-shaped battery that is in the key fob has a lifespan of two to four years, based on how often it is utilized and where it was purchased. The date of use is printed on the packaging or in the user manual.
If peugeot key fob replacement G28 stopped functioning after exposure to clean tap water then you must remove the battery, clean the electronic chip using a paper towel and isopropyl alcohol, and then dry it completely before replacing it. If the key fob has been exposed to salty or soapy water, it could have caused the chip to be damaged. You will need to replace it.
If you're unsure if the battery is defective You can test its voltage using a multimeter set to the car's voltage range and connected to the plus and minus terminals. The voltage should be between 12 to 13 volts, but if it is lower, the battery must be replaced. You can also reset your computer that is onboard by disconnecting and reconnecting the 12 volt batteries in reverse order. (positive cable first then negative cable). The engine should now start.
Faulty Receiver Module
If you don't see the "Key Detected" It could be the receiver module defective. It is the part that sends out an alert when your key fob turns on. It also functions as an alarm, and stops the vehicle from starting without the correct key.
This could be caused by several reasons, such as water damage or simply ageing. If the electronic chip in your Peugeot 308 keyfob is damaged due to dirty tap water It could be because the keyfob was contaminated with it. In this instance, you'll need to take the unit apart and thoroughly clean it with isopropyl alcohol or an electronic cleaner. When the battery is clean, you can try again.
If the issue persists, it is a good idea to see the local Peugeot expert or locksmith. They can utilize a diagnostic tool in order to identify the issue and then fix it.
Losing your Peugeot keys to your car can be an emotional experience. A professional auto locksmith can solve the issue in minutes. They can cut a new key and then program it into your vehicle, making sure you're on the road again in the shortest time possible. Find a locksmith in your area.
Faulty Electronic Chip
The electronic chip in the Peugeot 308 key fob plays an essential function in the remote control system. If it is damaged your car might not start or you might receive a message stating "anti-theft active". If this occurs, the only solution to fix the problem is to purchase a new key. Auto locksmiths who are professionals can provide this service within the shortest possible time.
The chip inside the chip of your Peugeot 308 key fob can become faulty due to sweat, water damage, dirt or other reasons. If your Peugeot 308 key fob is exposed to soapy water, you must clean it right away. You can clean the electronic component with a paper towel soaked in isopropyl Alcohol. After that, you should let the battery completely dry.
Sometimes, a key fob can stop working because of radio interference. This can be caused when other devices use the same frequency as your Peugeot keyfob. This can be caused by poor conditions or objects near to the vehicle. If you experience this issue you should visit an Peugeot dealership.
The Peugeot 207/308 key fob is extremely delicate and requires special care. You shouldn't drop it or throw it around. If you lose it, try to find it as quickly as you can. You can reset all on-board computers by disconnecting the battery that is 12 volts for a few minutes. Be sure to disconnect the negative cable first, and then the positive.